Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Start the GUI

First step: show the shape (refer to Fig. 1)

  1. Select the mask file; say Yes to create filled mask
  2. Deselect Overlay 1 and 2, click Display

Overlays

Select the file to overlay

For increasing/decreasing, you can select separate files and use different colormaps

To get range of values, use the CSPM function Image intensity info (or type im_info at the command prompt)

This will display min, max and so on, so you can optionally set these so that the color scale is fixed. 

Note that you may need to set the minimum threshold to just over 0, as otherwise everything might be colored with the Overlay.

Save images at fixed intervals

Display the VOI and overlays; set the view where you want it, at a know angle

Edit the CSPM file shape_makeviews

>>edit shape_makeviews

Videos

Edit the CSPM file shape_video

>>edit shape_video

 

 

Figure 1

  • No labels