See command line for batch option.
To add a peak: right-click on the blue line in the top graph.
To delete a peak: right-click a peak (the following trough will be removed too).
Running from Matlab:
load D:\Working\WHH\all3101
% run_pd
x = D.recording{1}.ts.pleth.Time * 60;
y = squeeze( D.recording{1}.ts.pleth.Data );
O = peakdetect_gui( y, x );
| Field | Meaning | ||
|---|---|---|---|
| Core output | |||
| px | peak timepoint | ||
| py | peak height | ||
| tx | trough timepoint | ||
| ty | trough height | ||
| New channels | |||
| ratex | rate timepoint | timepoints at which we have a rate caluclation | |
| ratey | rate value | bpm (beats/breaths per minute) | |
| intervalx | interval timepoint | timepoints at which we have an interval calculation (inverse of rate) | |
| intervaly | time from previous peak | ||
| heightx | height timepoint | ||
| heighty | peak-to-trough amplitude | au (arbitrary units) | |
| ratex_seconds | rate timepoint in seconds | (batch only) | |
| ratey_Hz | rate in Hertz | (batch only) | |
| ratey_bpm | rate in cycles/minute | (batch only) | |
| peak_num | total number of peaks + troughts | ||
| Other fields: parameters for automatic peak detection | |||
O =
peak_num: 2619
px: [1x1310 double]
py: [1x1310 double]
tx: [1x1309 double]
ty: [1x1309 double]
meany: [1x81200 double]
limit_pk: [1x81200 double]
threshold_pk: [1x81200 double]
limit_tr: [1x81200 double]
threshold_tr: [1x81200 double]
all_valpx: [1x1310 double]
all_valpy: [1x1310 double]
all_valtx: [1x1310 double]
all_valty: [1x1310 double]
all_px: [1x2102 double]
all_py: [1x2102 double]
all_tx: [1x2101 double]
all_ty: [1x2101 double]
px_auto: [1x1310 double]
py_auto: [1x1310 double]
tx_auto: [1x1309 double]
ty_auto: [1x1309 double]
ratex: [1x1309 double]
ratey: [1x1309 double]
intervalx: [1x1309 double]
intervaly: [1x1309 double]
heightx: [1x1309 double]
heighty: [1x1309 double]